M8 X 1.25 BAER TAP SET - baercoil baer coil unf 7/16 x 20 60 mm P (depth) The

60 mm P (depth) The thread insert must sit 1/4 - 1/2 turns below the surface B (thread depth with chamfer) 8

8045 EN-GJMW-450-7 0

The BaerCoil® thread insert is the perfect solution for damaged threads and that at the same time nominal diameter

25 with cutting slots

M8 X 1.25 BAER TAP SET - baercoil baer coil unf 7/16 x 20 60 mm P (depth) TheProduct information BAER HSSG Hand Tap Set (3pcs.) M 8 x 1. 25 The hand tap set consists of three taps and allows you to cut a finished thread with significantly reduced risk of breakage. The advantage of three piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with one ring) removes 65 per cent of the thread profile and the intermediate tap (No. 2) (marked with two rings) removes 85 per cent.